Hey, no offense, but your hot tub cover smells bad. Maybe you’ve gotten used to it?
Don’t worry, it happens to all spa owners at some time or another; water is one of nature’s most erosive substances. Moisture seeps in and ends up being trapped between the external vinyl shell and the plastic wrapped foam cores. The warm, wet environment is best for mold and mildew and other forms of stinky stuff.
If moisture has actually permeated even more into the plastic wrapped foam core, the cover becomes waterlogged, which can quickly grow all sorts of dark and foul-smelling slime, however likewise make the cover truly challenging to get rid of, and not as efficient at keeping the heat in the spa. Time for a better kind of hot tub cover
Foul-smelling Hot Tub Cover?!?
• Broken or damaged. Cracked foam cores, ripped or used areas, torn joints. A hot tub cover that loses it’s arched roof line, to keep water draining off properly, will ultimately begin to puddle water, which is probably time to buy a new hot tub cover! A spa cover with threadbare areas in the vinyl is also problem, and although you can ward off the inevitable with a duct tape repair, the water will win, eventually.
• Not Removed Regularly. Remove your hot tub cover weekly for 2 hours of airing out. A better cover can endure longer periods, but it’s a good habit to eliminate the cover and let it get some air on a weekly basis. If you can easily open the zipper to allow moisture to leave do so, however don’t remove delicate foam panels unless definitely needed.
Actually, this is just hogwash. The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, hot tubs by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the hot tub.
• Poorly Made. It’s simple to make a hot tub cover with tape and staples, however it will not stop moisture extremely well. Even the best foam filled Hot Tub Covers with vacuum-wrapped and heat bonded joint are not going to keep the intense wetness from your spa from reaching the foam core. The only real solution is a hot tub cover utilizes air to insulate instead of foam.
• Bad Spa Water. If the spa water is not preserved routinely with sanitizer and filtering, or is not surprised frequently enough, germs and algae can make the most of a congenial environment to grow. Low pH, high chlorine or high ozone levels can also weaken the underside of your hot tub cover cover. Because the cover is so close to the spa, it soaks up the chemistry of the spa. Clean, clear and hygienic water is the best environment to prevent foul-smelling spa covers. (Sorry however this is simply BS) The truth is the areas in the foam are almost laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outside Hot Tub Covers, unless your back deck is covered or your spa remains in a gazebo, you have sun, rain, pollen, dust, pollution, and animals to contend with. If you have a partial roofing, that can be worse than no roofing system at all, if an overhanging eave drains water onto the spa cover. Clean and condition a spa cover 2-4 times each year, so that it always looks terrific, and is secured from the aspects. Again, this truly isn’t really going to stop the mold and mildew from growing inside a foam cover. But it will help your spa dealership pay their bills.
Repair Your Hot Tub Cover!
• Remove to Safe Location: This first step may seem obvious, but you require an excellent place to enable the cover to sit undisturbed from animals, wild animals, and winds. It needs to be a sunny area if possible, or a dry indoor location with low humidity can also be used.
• Deodorize & Disinfect: You might not need to do both, it’s finest to be as gentle as possible. Do not use family cleaning products on your spa cover, odd chemicals can wind up in your spa water. Carefully clean all outside surfaces with spa cover cleaner, and enable the panels to dry.
• Remove the Panels: Again, this should be avoided if possible, because the panels could become damaged during removal or cleansing. But if you figure out that there is something slimy inside, you can generally unzip and remove the panel for a cleaning inside and out.
How frequently does your spa dealer expect you to do all this? If your hot tub is safeguarded from most sun and rain, twice annually. If it’s visible it needs to be 3-4 times annually. Let that sink in a minute.
Much better Choice
The easiest remedy for a foul-smelling hot tub cover is to just purchase a various sort of hot tub cover A smelly swim spa cover simply implies that your cover is handling wetness, and things are beginning to grow! Hot Tub Covers from SpaCap.com that doesn’t use foam but has actually sealed air chambers rather will avoid giving the mold and mildew a location to grow in the first place.